This Is The Intermediate Guide The Steps To Ghost 2 Immobiliser Fitting Near Me

· 6 min read
This Is The Intermediate Guide The Steps To Ghost 2 Immobiliser Fitting Near Me

Ghost Immobiliser Review

Consumers are always seeking ways to stop car theft as it increases. Ghost immobiliser is an innovative new device that does just that.

It's the first-ever aftermarket CAN bus immobiliser that protects your vehicle from key cloning, hacking or keyless entry. It also prevents thieves from stealing your vehicle.

No Faraday Bags and Radio Signals

Unlike other physical anti-theft devices like steering wheel locks and wheel clamps, ghost immobilisers have been designed to be covert and inaccessible. Incorporated into the vehicle's buttons they offer protection against key hacking, cloning, ECU swapping, and even key theft. A ghost immobiliser prevents the engine from starting unless you enter a specific PIN code along with your key fob. This PIN code can be up to 20 presses long, and is changed by the driver using an app or the buttons on the vehicle. If you forget your pin an item breaks or you sell your vehicle, you can use an emergency PIN that is unique to each device to reset the system.

In addition Ghost immobilisers aren't detected by diagnostic tools. They don't emit any radio frequency signals so thieves aren't able to use sophisticated RF scanning technology to detect the presence of an immobiliser. They also utilize the CAN data network that does not require wire cutting after installation and is more quiet than other immobilisers.

Ghost immobilisers aren't Thatcham approved but they are TASSA-approved. Certain insurers will offer lower insurance rates to vehicles that have an aftermarket immobiliser. However, they are recognized as an additional security measure that can deter thieves.

Autowatch Ghost is unlike factory-fitted immobilisers because it is compatible with a range of vehicles that include vans and motorhomes. It also works with electric cars or ride-on lawnmowers, as well as motorhomes. This means that it is more adaptable than other types of anti-theft devices and can be combined with vehicle trackers to give you the most comprehensive car security package.

If you would like to know more about how to secure your vehicle with the latest Ghost immobiliser made by Autowatch Contact us here at MotorGuard. We are Midlands' leading car security specialists and installers and can provide an experienced and professional service to help you secure your pride and joy. We provide a free quote on all of our products and services. We can also assist you choose the best security system for your vehicle.

No key fobs or LED indicators

Ghost immobilisers are built into the wiring of your vehicle, meaning they cannot be removed or overridden. Furthermore, since it does not use keys or LEDs, it is far more difficult to hack and locate than a standard factory-installed immobiliser.

The device connects to the CAN (Control Area Network) and allows you to choose a unique PIN push sequence that can be up to 20 digits - that is required to start your Range Rover or Land Rover J. It's similar to the way in which you would enter a pin code into your bank card to secure it. It's also not affected by the process of cloning, or ECU swapping that would normally disable the factory immobiliser.

Because it utilizes your vehicle's buttons, it is weatherproof and tiny which makes it nearly impossible for thieves to detect. It also communicates with the CAN data bus, and as such it operates in a quiet manner, making it difficult to identify. This makes it a great addition to your security system and is especially useful because it can be used in conjunction with other Autowatch technologies, such as the Ghost Bluetooth tag. The tag lets you start your vehicle without entering your PIN number or the Ghost app.

Another benefit of the ghost immobiliser is that it does not leave visible marks on the interior of your vehicle, which can be an issue with other security products that are sold aftermarket. This is especially attractive to those who want to keep their pride and joy as authentic as possible when it comes time to sell.

The Autowatch ghost immobiliser is an TASSA approved product and may reduce your insurance costs as it lowers the risk of your vehicle being stolen. It is available to order from MotorGuard the Midlands' leading security specialist for vehicles and installer. Our installers are certified to install this discreet and efficient solution for your joy and pride. Contact us now to discuss your needs or to make an appointment at our Coventry workshop.

Simple PIN Code Change Process

In contrast to key fobs, which utilize codes to unlock the ECU and start your vehicle ghost immobilisers connect to the car's ECU through its own CAN data network. They are therefore undetectable, silent and unhackable by diagnostic tools. These systems can be fitted to a variety of vehicles including motorhomes and trucks, as well as plant machinery.

Our Autowatch Ghost system has been designed to offer complete protection against theft. It works to prevent your vehicle being started unless you have either the unique PIN or the smartphone application that has the ghost app installed on it. This is a high level security that will safeguard your vehicle from key cloning. Hacking and ECU Swapping.

The reason it's so secure is that there is no need to include extra components like key fobs, LED indicators or a remote. Instead, the device uses your existing buttons on your steering wheel and door panels to generate an adjustable sequence that needs to be entered prior to the time your vehicle can start. This could be up to 20 times long and is similar to the PIN number on credit cards.

Additionally the device is concealed and won't reveal the location of the device to thief. Furthermore, it doesn't make use of radio signals and operates on the CAN data network, which makes it unnoticeable to thieves using RF scanners.

Many car thieves will attempt to remove the CAN chip or replace it inside the ECU to be able to avoid detection. But, this method is only possible by professionals with access to specialised tools. Ghost immobilisers can safeguard your vehicle from a variety of types of vehicle thefts.

It can also be paired with an iPhone, which you will need if you wish to start your car once it is parked at work or home. The app will recognize the phone and allow you to drive without needing a PIN code. This feature is available for any model of Autowatch Ghost, and you can connect as many smartphones it as you'd like.

Service Mode

The Autowatch Ghost 2 Immobiliser System is a discreet silent, quiet and next-generation device that safeguards your vehicle unlike any other. It is impossible to start the vehicle without your PIN code, or an app authorisation. It prevents signal jamming, device spoofing, and key cloning, which are all commonly used techniques to bypass normal immobilisers.



The Ghost is a  hidden unit that sits inside the wiring harness that is behind your dashboard. The device then connects to the CAN data network of your vehicle and communicates with the engine control units, making it impossible to start the car without the correct sequence. The device is tiny and weatherproof, making it virtually invisible to thieves.  what is a ghost immobiliser  can be hidden in the dash, beneath the steering wheel, or anyplace else on the vehicle.

Installation is fast and painless and most installations take just two hours. We provide a thorough demonstration of how the Ghost operates and then hand over the owner's manual, installation certification, the emergency card and ensure you are happy with the product before you leave.

We are a recognized installer for Ghost and we are the only company in Ireland that is accredited with this level of accreditation. This means that you can be certain that you will receive professional and quality installation.

The Autowatch Ghost is compatible with a large range of vehicles. It can be installed on motorhomes and caravans, motorbikes and ride-on lawnmowers. Immobilisers can be fitted to any vehicle so long as it is powered by a power source.

The Ghost Immobiliser uses the buttons on the original key fob to generate an encrypted sequence to disarm (like a PIN code) that must be entered before the engine can start. The driver can change the sequence at any time. It can be comprised of up to 20 different actions. This is a safer method of security than using a key fob as nobody else will be able to drive your vehicle. This prevents thieves from hacking the system in order to gain access the key code or other information that is transmitted to the ECU of the vehicle. it.